[Wanted to buy] Exige S1 Emerald

Speaks for itself really !
jojo99
Posts: 35
Joined: Sat Mar 12, 2016 8:47 pm

[Wanted to buy] Exige S1 Emerald

Post by jojo99 » Sun Feb 10, 2019 8:35 pm

Hi everyone,

I was wondering if someone is ready to sell an emerald K3 or K6 ready to use for an Exige S1?!
Would be happy to monitor all settings.


Thanks! :)

winthattt
Posts: 751
Joined: Fri Feb 12, 2010 4:45 pm
Location: Sunny Derbyshire

Re: [Wanted to buy] Exige S1 Emerald

Post by winthattt » Sun Feb 10, 2019 8:52 pm

Emerald now sell an adapter loom so it should be plug and play. My car is standard apart from verniers and runs better with the standard ecu than it did with a mapped emerald. It did not for a while which I found to be a dead lambda probe. The problem with simple mappings for me was it not working on really hot/cold days or when things like the heater, fans and lights are on. You may have better luck. If your engine is non standard it’s a different matter, an emerald will be essential.

Keith

markf
Posts: 113
Joined: Sun Jul 17, 2005 11:30 am

Re: [Wanted to buy] Exige S1 Emerald

Post by markf » Wed Feb 13, 2019 12:56 pm

Hi. I have a new K3 with leads and manual that I may part with. I bought it a while back from a guy who was going the Audi route but then changed his mind. It was set up for 5 cylinders but I had Emerald revert it for 4 cylinders for a project that still hasn’t happened yet!

markf
Posts: 113
Joined: Sun Jul 17, 2005 11:30 am

Re: [Wanted to buy] Exige S1 Emerald

Post by markf » Sat Feb 16, 2019 12:59 pm

Hers some pics of my K3
Attachments
7AECD1BB-7E26-4910-A4A9-875075A7413C.jpeg
91EC5596-8F2A-4657-8797-E0116CC467E2.jpeg
76756D09-44FD-44BE-A187-9B9A7699C04D.jpeg

jojo99
Posts: 35
Joined: Sat Mar 12, 2016 8:47 pm

Re: [Wanted to buy] Exige S1 Emerald

Post by jojo99 » Sun Feb 17, 2019 8:21 pm

sounds in a good condition. Don't you have the USB cable? may be a generic cable can do the job? tks

-> no USB cable onto the K3, Sorry

winthattt
Posts: 751
Joined: Fri Feb 12, 2010 4:45 pm
Location: Sunny Derbyshire

Re: [Wanted to buy] Exige S1 Emerald

Post by winthattt » Mon Feb 18, 2019 8:10 pm

You can buy a usb to serial adaptor, that’s what I did with my k3. Get the adaptor from Emerald as that one is tested and works.

markf
Posts: 113
Joined: Sun Jul 17, 2005 11:30 am

Re: [Wanted to buy] Exige S1 Emerald

Post by markf » Tue Feb 19, 2019 11:37 am

If anyone else is interested I was hoping to get £450 but am open to offers😁

Post Reply