fitting TC to the S1

Topics relating to the series 1 Exige
User avatar
s-express
Posts: 35
Joined: Wed Feb 18, 2015 10:11 pm
Location: North Wales
Contact:

fitting TC to the S1

Post by s-express » Wed Dec 05, 2018 5:45 pm

Ok, so I'm going to skip my VAG ecu and fit a DTA S80 pro, this will give me the ability to use a quite sophisticated TC option.
No problem fitting rings and sensors on the rear hubs - but the front looks a little more complex - has anyone done it? And if so, HOW???
S1 Exige 036 Audi powered

User avatar
AndyD
Posts: 3303
Joined: Sun Mar 30, 2003 11:00 am
Location: No Fing idea ..

Re: fitting TC to the S1

Post by AndyD » Wed Dec 05, 2018 10:46 pm

On the Orange car Martin and Steve copied what Pilbeam did and made a new Wheel bearing washer with stakes on - you might just be able to see the sensor that was bolted to the upright to pick up off the stakes.


Image

Image

User avatar
s-express
Posts: 35
Joined: Wed Feb 18, 2015 10:11 pm
Location: North Wales
Contact:

Re: fitting TC to the S1

Post by s-express » Thu Dec 06, 2018 5:30 pm

Nice fix :-) Thanks for that. Just need to speak to DTA to make sure the ecu will be happy with a different no of pulses from front to rear.
Cheers
S1 Exige 036 Audi powered

Post Reply